Find retailer

Knot laquer

Paint indoors, Primer

Water-based varnish for exposed knots, which significantly reduces the risk of penetration of knots when painting wood indoors. Lightweight and good flowability, which reduces visible brush strokes in the paint layer. Paint in two coats to reduce the risk of penetration of the knots.

Technical details

Gloss: Glossy
Consumption: 6-11 m2/L
Dust dry: 0,5 h
Repaintable: 2 h
Application temp: Min +8°C
Tools: Brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Application

Preparations

The surface to be treated must be clean, dry and solid. Scrape or sand off any raisin before applying the product.

 

Application

Stir the product thoroughly before use. Apply twice for best results. The first application blocks the resin, the second application seals the first. It is then possible to apply the paint of your choice.

 

Other

NB! This product will provide a good cover against resin seeping through the paint, but because of the many different kinds of resin present in wood, we cannot fully guarantee that the product will block all seepage.

Data sheets

Product data sheet
Safety data sheet
Sikkerhedsdatablad
Sikkerhetsdatablad
  • Namn.
    Article no.

  • Knot laquer 0,3L

    40502

Calculate paint amount
Calculate paint amount
You need in total approximately X liter paint of Knot laquer for 1 stroke on a surface of 1 sqm
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface
11
6