Product

Gloss: Fully-matte
Consumption: 4-8 m2/L
Dust dry: 1 h
Repaintable: 3 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry and solid. Wash any previously painted surface with paint wash and rinse with water. Do not apply Multimatt on previously treated, gloss surfaces. Remember to protect floors and furniture before starting the application.

 

Applying the product
Apply 1 or 2 coats for complete coverage. Allow the product to dry before applying a new coat. Remove any loose old paint by brushing or scraping, and wash and rinse with 10% paint wash if required. Do not apply Multimatt on previously treated, gloss surfaces. Full effect of the product (coverage and whiteness) will be had when it has fully cured, which normally takes between 24 and 72 after application at normal surface temperature and humidity.

 

After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. The reason for this is that the product will cause problems in the sewage treatment plant. We care about the environment, and so should you.

 

Care
Wipe the surface with a dry cloth. Do not moisten the cloth. Never use cleaning alcohol for cleaning acrylate paint.