Product

Gloss: Semi-gloss
Consumption: 7-10 m2/L
Dust dry: 2 h
Repaintable: 12 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. Scrape off any loose paint. Wash any previously painted surface with paint wash and rinse with water. Leave to dry completely. Discolourations and spots where the metal is not painted should be primed with a suitable primer, such as Colorex Primer. Remember to protect floors and furniture before starting the application.

 

Applying the product
Apply the product using a suitable, good quality brush or – after thinning 5% to 10% with water – with a spray gun. Apply at least 2 coats, letting the product dry in between applications.

 

After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.

 

Care
Use a soft cloth moistened with water, and some mild detergent to wipe the surface. Never use cleaning alcohol for cleaning paints or lacquers.