Find retailer

Adhesion Primer Aqua

Paint indoors, Primer

Alkyd-based primer and adhesive primer for wood and metal indoors and outdoors. The product is used as an adhesion promoter, insulator and anti-corrosion primer. Unpainted and previously painted wood, metal, sheet, plaster and tile surfaces before final acrylate or alkyd coating.

Technical details

Gloss: Matte
Consumption: 6-8 m2/L
Dust dry: 3 h
Repaintable: 24 h
Application temp: Min +5°C
Tools: Brush, roller
Recycling: Do not pour remainings down the sink. Leave at waste collection center.


Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The surface to be treated must be clean, dry and solid. Wash any previously painted surface with paint wash and rinse with water.


Applying the product
The product is to be applied with brush, roller or spray gun. Check that the surface to be treated, e.g. old paint will provide good adhesion for the product. Usually two thin applications will suffice, letting the first application dry before applying the second time.


After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.

  • Name
    Article no.
  • Adhesion Primer Aqua 1L
  • Adhesion Primer Aqua 3L
Calculate paint amount
Calculate paint amount
You need in total approximately X liter paint of Adhesion Primer Aqua for 1 stroke on a surface of 1 sqm
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface