- Home
- >
- Products
- >
- Paint indoors
- >
- Lacquer paint
- >
- Effekt 80
Find retailer
Effekt 80
Paint indoors, Lacquer paint, Metal paint
Durable urethane alkyd varnish for wooden and metal surfaces indoors and outdoors. Suitable for wooden floors, linoleum, indoor and outdoor concrete and metal surfaces. Also suitable for interior and exterior finishing of wooden boats (above the waterline) and for doors, panels and furniture.
Technical details
Gloss: Glossy
Consumption: 7-10 m2/L
Dust dry: 6 h
Repaintable: 24 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Consumption: 7-10 m2/L
Dust dry: 6 h
Repaintable: 24 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Application
Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. Wood surfaces: The surface to be treated must be clean, dry and solid. Scrape off any loose paint. Wash any previously painted surface with paint wash and rinse with water. Leave to dry completely. Remove any oil stains using a suitable solvent. Prime any untreated wood surface using Woodwork primer Classic. Apply filler to uneven surfaces. Sand lightly. Prime with undiluted Woodwork primer Classic, sand with fine-grit paper and wipe off any dust before finishing the application with Effekt. Iron and metal surfaces: Brush with a steel wire brush/sand and degrease greasy surfaces and prime at once with an anti-corrosion primer to avoid corrosion. Remember to protect floors and furniture before starting the application.
Applying the product
Apply using a suitable roller, brush or – after thinning 10% to 20% with white spirit – with a spray gun. On doors and other large surfaces it may be advantageous to use a paint roller with a short nap before smoothing it with a lacquer paint brush. Apply at least 2 coats, letting the product dry in between applications.
After applying the product
Wipe off any excess product before cleaning the tools with white spirit. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.
Care
Use a soft cloth moistened with water, and some mild detergent to wipe the surface. Never use cleaning alcohol for cleaning paints or lacquers.
Calculate paint amount
Calculate paint amount
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface
10
7
Effekt 80
Stäng