Fokus V Woodstain
Semi-matte transparent water-based wood stain for untreated or pre-oiled wood outdoors. Also suitable for log houses.
Consumption: 5-12 m2/L
Dust dry: 6 h
Repaintable: 12 h
Application temp: Min +5°C
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry and solid. Remove any loose, porous or decomposed wood and wood fibres. For new or untreated wood, the surface should have an initial treatment with Colorex Primer Aqua or Primer Classic. Wash any previously painted surface with a mold and algae removal agent and rinse with water.
Applying the product
Use any brush suitable for the application of oil or wood stain. Apply to 2 or 3 planks at a time. Fokus V is normally applied with 2 coats. It is better to apply many thin layers than a few thick ones. Remember that the shade will be darker, the more layers you apply to the wood stain. Be particularly careful to treat the joints and the end pieces.
After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. The reason for this is that the product will cause problems in the sewage treatment plant. We care about the environment, and so should you.
Use a brush, sponge or soft cloth moistened with water, and some suitable detergent to wipe the surface. Flush, using water from your garden hose.