Product

Gloss: Semi-matte
Consumption: 8-12 m2/L
Dust dry: 0,5 h
Repaintable: 4 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry and solid. Remove any loose old paint, sand, wash and rinse with water. Leave to dry completely. In order to prevent the fibres from rising on untreated wood surfaces, wipe the surface with a cloth and lukewarm water. Let dry, and sand off the fibres that have risen using a fine sanding paper (grain 180–220) before you apply the first coat of the product. Remember to protect floors and furniture before starting the application.

 

Applying the product
If treating wood panels, apply the product on 1 to 2 panels at a time. The product is ready to be used. Apply with roller, brush or paint gun.
Apply at least twice to fully saturate the wood. Lightly sand with fine-grit sanding paper between each application.

 

After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. The reason for this is that the product will cause problems in the sewage treatment plant. We care about the environment, and so should you.

 

Care
Use a soft cloth moistened with water, and some mild detergent to wipe the surface. Never use cleaning alcohol for cleaning paints or lacquers.