- Home
- >
- Products
- >
- Paint indoors
- >
- Lacquer paint
- >
- Mästar 40
Find retailer
Mästar 40
Paint indoors, Lacquer paint
Varnish for door frames, moldings and other wooden parts indoors. Provides a hard, durable and non-abrasive surface with excellent adhesion. Lightweight and good flowability, which reduces visible brush strokes in the paint layer.
Technical details
Gloss: Semi-gloss
Consumption: 6-10 m2/L
Dust dry: 2 h
Repaintable: 12 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Consumption: 6-10 m2/L
Dust dry: 2 h
Repaintable: 12 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Application
Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. Wood surfaces: The surface to be treated must be clean, dry and solid. Scrape off any loose paint. Wash any previously painted surface with paint wash and rinse with water. Leave to dry completely. Prime any untreated wood indoor using Snickerigrund Aqua. Let dry, and sand off the fibres that have risen using a fine sanding paper. Apply putty to uneven surfaces. Sand lightly. Prime with undiluted Snickerigrund Aqua, sand with fine-grit paper and wipe off any dust before finishing the application with Mästar. Remember to protect floors and furniture before starting the application.
Applying the product
Apply using a suitable roller, brush or – after thinning 5% to 10% with water – with a spray gun. On larger surfaces it may be advantageous to use a paint roller with a short nap before smoothing it with a lacquer paint brush. Try on a smaller section at first in order to optimize the results. Apply at least 2 coats, letting the product dry in between applications.
After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.
Care
Use a soft cloth moistened with water, and some mild detergent to wipe the surface. Never use cleaning alcohol for cleaning paints or lacquers.
-
NameArticle no.
-
Mästar 40 Base C 0,45L13593801
-
Mästar 40 Base C 0,9L13593101
-
Mästar 40 Base C 2,7L13593301
-
Mästar 40 White/Base A 0,45L13500802
-
Mästar 40 White/Base A 0,9L13500101
-
Mästar 40 White/Base A 2,7L13500302
Calculate paint amount
Calculate paint amount
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface
10
6
Mästar 40
Stäng