Product

Gloss: Matte
Consumption: 4-10 m2/L
Dust dry: 4 h
Repaintable: 24 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry and solid. Brush off or scrape off any loose, old paint. Wash any previously painted surface with a mold and algae removal agent and rinse with water.
If there is mold on the surface it must be properly treated to prevent recurrence of the mold. Untreated wood, in particular the end pieces and the joints should be treated with Primer Oil Classic before the primer is applied.

 

Applying the product
Apply one or two coats with a roller, brush or – with thinning – with a spray gun. For better penetration, the first application can be diluted with 5% white spirit. It is better to apply many thin layers, with a day or two of drying in between, than a few thick ones. Avoid applying the product on warm surfaces or on surfaces where the sun is shining. We recommend applying two layers on new wood. When the primer is thoroughly dry: finish off by applying one of our products for outdoor use.

 

After applying the product
Wipe off any excess product before cleaning the tools with white spirit. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.