Find retailer


Paint outdoors, Facade-paint wood

Self-cleaning and easy to apply facade paint, which gives an extremely durable result. Developed ecpecially to meet the tough requirements of Nordic climate. Contains a unique hybrid of polyurethane alkyd and acrylic, which makes the product very flexible, minimally water-absorbent and extremely dirt-repellent.

Technical details

Gloss: Semi-gloss
Consumption: 6-10 m2/L
Dust dry: 1 h
Repaintable: 4 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Recycling: Do not pour remainings down the sink. Leave at waste collection center.


Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. Air and surface temperatures affect the end result, so do not apply the product if it is colder than +8°C. Make sure the surface is sufficiently dry before applying the product, maximally 16% moisture ratio. Do not apply the product to surfaces heated by the sun, if rain is expected within 24 hours or dew is expected within 1-2 hours after finishing the application. Old paint containing linseed oil can blister. The surface to be treated must be clean, dry and solid.


Applying the product
Untreated wood that has been outdoors for more than 4 weeks, must be washed and disinfected, and any loose grey fibres must be removed. Apply 2 coats of Colorex Outdoor Primer Aqua to joints and end pieces. For extra protection of the wood, especially at exposed positions, you should prime the entire surface with Aqua Primer. Prime the entire surface incl. end pieces with 1 application of Colorex Outdoor Primer Aqua. It is also possible to use Colorex Outdoor Primer 2-in-1 as a primer for untreated wood, since this product is a combination of primer oil and outdoor primer. Wash any previously painted surface with paint wash and rinse with water. Leave to dry completely. Use a suitable disinfectant in case of fungi and/or algae. Scrape off any loose paint and fibres or use a steel brush. Any untreated surface should be primed. Finish off with two applications of Colorex Titan, and leave to dry for the recommended time in between applications. Use a brush with compact bristles and work the product into the wood.


After applying the product
Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.


Use a soft scouring brush moistened with water, and some mild detergent to wipe the surface.

  • Name
    Article no.
  • Titan Cottage red 0,9L
  • Titan Cottage red 2,7L
  • Titan Cottage red 9,0L
  • Titan V Base A 0,9L
  • Titan V Base A 2,7L
  • Titan V Base A 9,0L
  • Titan V Base C 0,9L
  • Titan V Base C 2,7L
  • Titan V Base C 9,0L
  • Titan White 0,9L
  • Titan White 2,7L
  • Titan White 9L
Calculate paint amount
Calculate paint amount
You need in total approximately X liter paint of Titan for 1 stroke on a surface of 1 sqm
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface