Woodwork primer Aqua
Primer for door frames, moldings and other wooden parts. The product has good adhesion to most substrates and is an excellent base for Klenod and Mästar varnishes. Lightweight and good flowability, which reduces visible brush strokes in the paint layer.
Consumption: 6-8 m2/L
Dust dry: 2 h
Repaintable: 4 h
Application temp: Min +5°C
Tools: Brush, roller
Recycling: Do not pour remainings down the sink. Leave at waste collection center.
Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry and solid. Scrape off any loose paint. Sand and wash any previously treated surface with paint wash and rinse with water. Remember to protect floors and furniture before starting the application.
Applying the product
Prime any untreated wood indoor using with the product. Let dry, and sand off the fibres that have risen using a fine sanding paper. Apply another 1– 2 coats, sanding in between each coat, in order to obtain a smooth finish. Carefully wipe off all dust before applying the final coat. On doors and other large surfaces it may be advantageous to use a paint roller with short nap before smoothing it with a lacquer paint brush.
After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.