Product

Gloss: Depending on the substrate
Consumption: 5-15 m2/L
Dust dry: 4 h
Repaintable: 16 h
Application temp: Min +5°C
Tools: Brush or paint-pad
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Pre-treatment:
The surface to be treated must be clean, dry and solid. Use a steel brush, a steel scraper or sanding paper to remove any loose, porous or decomposed wood from the surface to be treated. Clean the surface with Tralltvätt and follow up with some disinfectant agent on surfaces with algae or mold. Rinse thoroughly with water.

 

Application:
Treat the surface with a brush, rag or sponge until the wood is saturated. Treat entire planks at a time in order to get even cover. Wipe off any excess oil after 5 to 10 minutes. Repeat the treatment if needed. Avoid applying if rain is expected within 24 hrs.

 

After application:
Wipe the tools carefully before cleaning them in water with some detergent. Close the lid of the container properly before storing it out of reach of children.