Find retailer

Strong

Paint indoors, Floor paint

Semi-gloss and durable one-component acrylate paint for interior floors. Varnish that is extremely suitable for wood and concrete surfaces, but also for joinery products. Tintable.

Technical details

Gloss: Semi-gloss
Consumption: 4-8 m2/L
Dust dry: 2 h
Repaintable: 8 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Application

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools for working on floors, and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. Untreated wood: In order to prevent the fibres from rising on untreated wood surfaces, wipe the surface with a cloth and lukewarm water. Let dry, and sand off the fibres that have risen using a fine sanding paper (grain 180–220) before you apply the first coat of the product. Prime the surface with Aqua Carpentry Primer. Concrete floors: You cannot apply the product on fresh concrete: let it cure for some months before applying the product. If there is any curing wax on the surface, this must be removed before using the product. Wash any previously painted surface thoroughly before applying the product. Remember to properly protect all surrounding surfaces before you start applying the product.

 

Applying the product
Apply at least two coats of undiluted product, using a roller, brush or – after thinning – with a spray gun. If applying to concrete surfaces, the product must be diluted by 5-10% with water for the first application, and then undiluted for the following 2 or 3 applications.

 

After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.

 

Care
Use a brush or a cloth moistened with water, and some domestic detergent to wipe the surface. Never use cleaning alcohol for cleaning paints or lacquers.

  • Name
    Article no.
  • Strong Base C 0,9L
    17893101
  • Strong Base C 2,7L
    17893301
  • Strong White/Base A 0,9L
    17800101
  • Strong White/Base A 2,7L
    17800301
  • Strong White/Base A 9L
    17800001
Calculate paint amount
Calculate paint amount
You need in total approximately X liter paint of Strong for 1 stroke on a surface of 1 sqm
Note, calculation is an approximation and the true amount of paint needed may vary depending on the surface
8
4