Product

Gloss: Fully-matte
Consumption: 10-12 m2/L
Dust dry: 1 h
Repaintable: 2-4 h
Application temp: Min +5°C
Tools: Brush, roller, air brush
Storage:
Recycling: Do not pour remainings down the sink. Leave at waste collection center.

Before applying the product
Always start by reading the instructions on the container, and remember to be meticulous from the very start of the paint job. The proper tools and careful preparations, are prerequisites for successful results. Stir the paint thoroughly before you start applying the product. The ambient temperature is another factor that determines the end result. Do not apply the product if it is colder than +5°C. The surface to be treated must be clean, dry, solid, free from residue, salt precipitates and releasing agents. Brush off or scrape off any loose, old lime or plaster. Check by tapping on the surface if any previous treatment has adhered well to it. Wash any previously painted surface with paint wash and rinse with water. Any previously untreated plaster or concrete surface with high mineral content must be primed with Betoprime. Remember to properly protect all surrounding surfaces before you start applying the product.

 

Applying the product
Apply one or two coats with a roller, brush or – with some slight thinning – with a spray gun. Do not apply more than what is needed for full coverage, since more layers will affect the diffusion effect considerably. Due to its high dry matter content, the product covers the surface well.

 

After applying the product
Wipe off any excess product before cleaning the tools with water. Close the lid of the container properly before storing it out of reach of children. Any residue of the product should not be disposed of in the drains, but should be disposed of in a proper and approved manner. We care about the environment, and so should you.